| Specifications
Fluid Types:
Mineral oils, typically used in engines or hydraulic actuators. Compatible with Brass, PTFE and NBR rubber.
Connections:
See diagram below.
Note: Outputs are factory selectable and dual outputs on output 1 are available on request.
Vibration (15.3 grms)
3 orthoganol planes for 3 hours per plane
Frequency (Hz)
24
60
100
240
2000
|
G2/Hz
0.04
0.5
0.5
0.1
0.1
|
Test performed in accordance with BSEN 60068-2-64 : 1993
Electical Rating:
Supply Voltage:
Supply Current:
Max. Load Current:
Alarm Delay Time:
Connection:
Start up Delay:
|
5 VDC or 7 – 35 VDC
1.5mA + source output
1.0A (sink) or 20mA (source)
0 – 25 secs rising or falling (factory set)
4 way DIN 72 585 connector
1 – 10 secs
|
Construction:
Body:
Probe:
Terminals:
Seals:
Connector:
Thread sealant:
|
Brass
PTFE
CZ121 Brass, Tin Plated
NBR rubber
30% Glass Filled Nylon 6
Polyacrylate Aqueous Emulsion Base (Dri-Seal 2061) – 1/4″ NPT only
|
Environmental Ratings:
Sealing:
Max. pressure:
Temp. ranges:
Weight:
EMC:
|
IP67
5.0 Bar (72 psi)
Fluid: -40°C to +130°C
Storage: -50°C to +140°C
53g
Type approval to EN ISO 13766:2006
|
Note: Torque setting on installation should not exceed 22Nm. Unit should be tightened with a 31mm ring spanner or 31mm socket.
Optional accessory:
Mating connector kit to suit harness wire cross sectional area of 0.5 to 1.5mm² :
Description:
Connector kit comprising of:
Crimp Terminals (x4)
Cable seals (x4)
Connector plug 4 way (x1)
|
