Print This Page  Email This Page

TachoDrive2

Purpose

TachoDrive2 (TD2) is a device designed for downloading the data in the DIGITAL TACHOGRAPHS SYSTEM. Together with the included software, TachoDrive Express, it allows to comply the legal requirements concerning the downloading and storing of the data from the SYSTEM. It allows to download the data directly from the driver card (built-in slot) as well as from the tachograph mass memory (cable included).

The device is available in two versions :

TD2 STANDARD recommended for the driver
or dispatcher		 TD2 TERMINAL with the TachoDrive key connected. Version to fix on the wall in the drivers room, in the company

Adventages of the TachoDrive2

  • compatible with all approved digital tachographs
  • built-in reader of the driver’s card ( reading the whole card takes less than 60 seconds )
  • intuitive TachoDrive Express software included
  • power supply: accumulators ( 2xAA included ), from the tachograph port, or the computer USBport
  • 256 MB memory ( 512 optionally ) allows to read 6000 driver cards or 250 full downloads of the tachograph mass memory or a combination of both
  • USB port ( does not require any additional drivers to work with the PC )
  • acoustic and flash signalization of the device activity
    status
  • ergonomic casing, small dimensions
  • competitive price
    		•

    Set includes

    TachoDrive2 STD (Standard)
    Order No. TachoDrive2 STD 10.TD2S.000

  • TachoDrive2 device
  • USB cable – mini USB
  • TD2 cable – tachograph
  • 2 x AA accumulators
  • TachDrive Express software
    (located in the TD2 memory)
  • Manual
    		•  TachoDrive2 TML (Terminal)
    Order No. TachoDrive2 TML 10.TD2T.000

  • TachoDrive2 device
  • USB cable -mini USB
  • TD2 cable – tachograph
  • 2 x AA accumulators
  • TachDrive Express software
    (located in the TD2 memory)
  • Manual
  • 230V power supply
    		•

    Technical data

  • Power
    		•  2 x AA accumlator NiMh, tachograph port, USB port of the PC
  • Ports
    		•  Smart card slot, USB slave (cable B), USB host (only in TML version), for a cable A to tachograph
  • Power consumption
    		•  max. 65 mA
  • Dimensios LxWxH
    		•  110,3x694x27,7
  • Weight with batt.
    		•  150 g
  • Protection degree
    		•  IP – 40
  • Working temperature
    		•  -5ºC ÷ +55ºC
  • Storage temperature
    		•  -25ºC ÷ +70ºC
  • EMC tests
    		•  In conformity with directive req. 89/336/EEC
  • PC system requirements
    		•  WIN 2000, XP; Pentium III 800MHz, 256 MB RAM, USB, TACHOMATT Yellow or other software for drivers activity analyzing

    Downloading the data from
    driver card    		 Downloading the data from
    tachograph (additional card
    required, i.e.: company card)    		 Downloading the data from driver card to the TD2 terminal

    Flash codes

      Activity mode Description Concern   Comments  
             
    1 During connection       
             
             
    2 Data transmission        
             
             
    3 The data has been downloaded successfully   Card,
    Tacho    		 Buzzer three beeps in the loop
             
             
    4 WARNING – after downloading     The data has been downloaded
      n=1 the card is full in more than 95% of its capacity   Card,
    Tacho    		 transfer the data from the key to the PC
      n=2 the data has been downloaded partially or not at all   Tacho Reason: no data found in the tachograph for the given period or company card number
      n=3 the data from TD configuration settings has been downloaded partially   Tacho Reason: there is no DTCO-1381 specific data for this tachograph – change TD configuration
      n=4 the data from TD configuration settings has been downloaded partially   Tacho Reason: there is no driver card in the tachograph – change the configuration of the TD key or insert the card and repeat the download process
             
             
    5 ERROR – while downloading     Error while downloading the data
      N=1 Incorrect conditions to execute the operation   Card,
    Tacho    		 i.e.: lack of card authorizing to download the data, ConditionsNotCorrect Or RequestSequenceError
      N=2 demanded data are not available   Card,
    Tacho    		 i.e.: lack of driver card while trying to download the data from the card, DataNotAvailable
      N=3 Unable to execute the operation   Card,
    Tacho    		 UploadNotAccepted
      N=4 The function is not supported by the tachograph   Tacho General reject, Service not supported,
    Subfunction not supported, Incorrect message length, Request out of range
      N=5 The tachograph is not responding   Tacho Timeout. No response after three attempts
      N=6 Tachograph communication error   Tacho  
      N=7 TachoDrive memory error   Card,
    Tacho    		 Format the memory or contact the seller
             
             
    6 WARNING   TD2 batteries are empty TD2 Connect to main adapter or USB PC port
      N=2     L1,L2 = green+red two short flash
    Buzzer two short beeps. When batteries are very low – signalisation in the loop
      LK1, LK2, LK3
    sequentionally flashing    		     During charging
      Just after connecting TD2 to tacho (cable A)   TD2  
      LK1, LK2, LK3 flashing     Choose data to download from tacho and press appropriate key.
    Appropriate LED is ON, and Buzzer beeps once for confirmation
            Insert card. LK1, LK2, LK3 are off