KELCH

Kelch

The Kelch series of contents gauges, caps and dipsticks are designed for use on metal and plastic storage tanks as used in the off-highway, lawn care, marine and generator set markets.

The gauge mechanism is simple and trouble free for long life and reliability in service. The caps have the same head configuration as the gauges and both can be customised to include special dial printing, vent styles and material colours.

Further options for the caps include lanyards and custom printing, and for the gauges, the spiral and frame in alternative materials and limited spiral twisting for long filler necks.

Utility 175 Series Gauge
  • Fits all 1.3/4″ buttress threads 6 tpi
  • Plastic caps in K100 Nylon 6 Copolymer
  • For use on plastic tanks
  • Lengths from 5″ – 23″ in 1/4″ increments
  • Fits welded adaptor G/MP2

Guardian 225 Series Cap & Gauge
  • Fits all 2.1/4″ buttress thread necks
  • Plastic caps in K100 Nylon 6 Copolymer
  • Gauge lengths from 5″ – 23″ in 1/4″ increments
  • Guardian design for added gauge protection
  • For use on plastic tanks
  • Fits welded adaptor G/MP5

Suregrip 225 Series Cap & Gauge
  • Fits all 2.1/4″ buttress threads (5 tpi) necks
  • Plastic caps in K100 Nylon 6 Copolymer
  • Gauge lengths from 5″ – 23″ in 1/4″ increments
  • For use on plastic tanks
  • Fits welded adaptor G/MP5

Utility 228 Series Cap & Gauge
  • Fits all 2.9/32″ quarter turn bayonet type filler necks
  • Plastic caps in K100 Nylon 6 Copolymer
  • For use on metal tanks
  • Gauge lengths from 5″ – 23″ in 1/4″ increments
  • Fits welded adaptor G/MP6
  • Positive stop (cannot over tighten)

Guardian 228 Series Cap & Gauge
  • Fits all 2.9/32″ quarter turn bayonet type filler necks
  • Plastic caps in K100 Nylon 6 Copolymer
  • Gauge lengths from 5″ – 23″ in 1/4″ increments
  • Guardian design for added gauge protection
  • Fits welded adaptor G/MP6
  • Positive stop (cannot over tighten)

Remote Series of Gauges
  • Mounting via grommet or 1″ – 11,5 NPSM thread with O-ring
  • Plastic caps in K100 Nylon 6 Copolymer
  • Lengths of 5″ – 23″ in 1/4″ increments
  • Permanent mount for added security
  • Automotive style indicator
  • Low profile & compact
  • For use on metal or plastic tanks

TIPS™ 350 Tank Inversion Protection System
  • Fits all 2.1/4″ or 3.1/2″ buttress thread (5 tpi) necks
  • Meets ANSI spec. Z130.1 1986 for rollover protection
  • Minimizes leakage when tank inverted (35° angle or more)
  • Wide diameter for easy fill
  • Available as cap only
  • For use on plastic tanks

Dial face examples:
Kelch